3 Series E92 M3 (S65) COUPE
13 41 100
Removing and installing/replacing
supplementary air line (S65)
Necessary preliminary tasks:
•
Remove intake air manifold
•
Partially disconnect and raise engine wiring harness
•
Unclip holders for supplementary wiring harness
Remove idle air hose (2).
Replace clamps.
Lever idle actuator out of holder.
Release screws, detach idle air line.
Remove intake manifold pressure sensor on bank 2.
Before installing, check O-rings on unions and apply a light
coating of grease.
Assemble engine.
RA Removing and installing/replacing supplementary air line (S65)
BMW AG - TIS
21.02.2013 19:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -