3 Series E92 M3 (S65) COUPE
13 62 607
Replacing pulse generator on transmission
(S65)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
Remove underbody protection
Important!
Oil emerges when the pulse generator is removed. Catch oil
in a suitable container and dispose of this oil in accordance
with country-specific regulations.
Unlock connector and remove.
Release screw (1).
Remove pulse generator.
Note:
Top up transmission fluid.
Now clear the fault memory.
Add final details to vehicle.
RA Replacing pulse generator on transmission (S65)
BMW AG - TIS
21.02.2013 19:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
