3 Series E92 M3 (S65) COUPE
13 62 610
Replacing pulse generator on
crankshaft/transmission (S65)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
Remove underbody protection
•
Remove reinforcement plate
Release screws (1).
Remove cover.
Unlock connector and remove.
Release screw (1).
Remove pulse generator.
Note:
Now clear the fault memory.
Add final details to vehicle.
RA Replacing pulse generator on crankshaft/transmission (S65)
BMW AG - TIS
21.02.2013 19:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
