bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing_replacing Fan Cowl With Electric Fan (S65)|Page 667 > < 1 RA Removing And Installing Radiator (N51, S65)|Page 665
Page 1
background image

17 11 035

Removing and installing/replacing fan cowl
with electric fan (S65)

Important!

Risk of short circuits!

When removing fan cowl, protect plug and housing against
moisture; dry with compressed air if necessary.

Necessary preliminary tasks:

Read out fault memory of DDE control unit; if necessary, work

through test schedules

Switch off ignition

Remove front underbody protection

Remove intake duct

Unclip coolant lines from fan cowl.

Unlock connector and remove.

Important!

Risk of short circuits!

When removing fan cowl, protect plug and housing against
moisture; dry with compressed air if necessary.

Release retaining screw (1) for fan cowl.

Unclip cable.

Unclip vent lines.

Turn lower hose holder through 90

°

.

Remove fan cowl (2) towards top.

RA  Removing and installing/replacing fan cowl with electric fan (S65)

BMW AG - TIS

21.02.2013  20:23

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing_replacing Fan Cowl With Electric Fan (S65)|Page 667 > < 1 RA Removing And Installing Radiator (N51, S65)|Page 665