3 Series E92 M3 (S65) COUPE
Important!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an
alternator malfunction.
Unfasten nut.
Remove holder from oil cooler line (1).
Unclip coolant hoses from holders.
Cover ribbed V-belt with cleaning cloth or similar.
Release nuts and remove oil lines from filter housing.
Note:
Add final details to vehicle.
After completing work, check and correct engine oil level.
RA Removing and installing/replacing oil line for engine oil cooler (S65)
BMW AG - TIS
21.02.2013 20:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -