3 Series E92 M3 (S65) COUPE
18 40 020
Removing and installing/replacing right
exhaust manifold (S65)
Warning!
Scalding hazard!
Only perform these tasks on an engine that has cooled down.
Necessary preliminary tasks:
•
Remove complete exhaust system
•
Secure engine in installation position with special tool
•
Lower front axle support
•
Remove right engine support arm
Note:
For purposes of clarity, the following work steps are shown on the
engine after it has been removed.
Release screws.
Remove heat shield.
Unscrew nuts.
Remove exhaust manifold (1).
Installation:
Replace nuts.
Tightens nuts on each flange.
Replace seals, paying attention to installation location of seals.
Tightening torque 18 40 1AZ
.
RA Removing and installing/replacing right exhaust manifold (S65)
BMW AG - TIS
21.02.2013 20:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
