3 Series E92 M3 (S65) COUPE
Release screws and remove clutch from flywheel.
Tightening torque 21 21 1AZ
.
Observe the following procedure when installing the removed
clutch and clutch plates.
Insert special tool 21 2 180 in clutch.
Press special tool 21 2 180 together at handles (1) as far as it
will go and tighten down knurled screws (2).
Adjustment ring of clutch is now secured in its original position
(wear position).
Note:
Locking hooks (1) of special tool 21 2 180 must engage in
openings of pressure spring.
RA Removing and installing/replacing clutch (GS6-53BZ) S65
BMW AG - TIS
21.02.2013 20:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
