3 Series E92 M3 (S65) COUPE
Fit clutch (1) to flywheel.
Tightening torque 21 21 1AZ
.
Note:
Clutch (1) must be secured by way of dowel pins (2).
Release spindle (1) until load is fully removed from diaphragm
spring (2) Remove special tools 21 2 170 and 21 2 180 .
Withdraw special tool from clutch plate with aid of accompanying
screw (1).
Installing new clutch
Important!
Locking piece may only be removed clutch is screwed down!
Pressure plate and dual-mass flywheel are balanced together.
The clutch must be replaced if a new clutch is fitted.
RA Removing and installing/replacing clutch (GS6-53BZ) S65
BMW AG - TIS
21.02.2013 20:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
