3 Series E92 M3 (S65) COUPE
22 32 050
Replacing cross-member for transmission
mounting (S65)
Necessary preliminary tasks:
•
Remove rear underbody protection
Support transmission with hydraulic jack.
Release screws (1).
Tightening torque: 22 32 4AZ
.
Unscrew nuts (2).
Tightening torque: 22 32 3AZ
.
Remove cross-member.
RA Replacing cross-member for transmission mounting (S65)
BMW AG - TIS
21.02.2013 20:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
