3 Series E92 M3 (S65) COUPE
Release bolts (1-4).
Lower front axle carrier by max. 10 cm.
Installation:
Check threads for damage; if necessary, repair with Helicoil thread
inserts.
Make sure screws are installed in correct positions.
•
Screw (1) M12x90
•
Screw (2) M12x145
•
Screw (3) M12x53
•
Screw (4) M10x42
Tighten down first screws (1) and then screws (2, 3, 4).
Tightening torque 31 10 1AZ
.
After installation:
•
Carry out steering angle sensor adjustment
RA Lowering/raising front axle carrier (M3, universal lifter)
BMW AG - TIS
21.02.2013 21:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -