3 Series E92 M3 (S65) COUPE
31 21 090
Replacing (removing and installing) left or
right swivel bearing (M3)
Special tools required:
•
31 2 230
•
31 5 230
Important!
To ensure optimum power transmission from the swivel
bearing to the spring strut, it is essential to use special tool
31 5 230 for mounting on the spring strut!
Special tool 31 5 230 only be removed after the bolt
connection has been tightened down!
Necessary preliminary tasks:
•
Remove front brake disc
•
Remove front pulse generator from swivel bearing
Slacken nut (1).
Remove jointed rod (2) from control arm.
Installation:
Sensor lever (3) must point from ride-height sensor to left front
wheel.
Tightening torque 37 14 3AZ
.
RA Replacing (removing and installing) left or right swivel bearing (M3)
BMW AG - TIS
21.02.2013 21:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
