3 Series E92 M3 (S65) COUPE
31 31 003
Removing and installing complete front left or
right spring strut (M3)
Note:
If a spring strut with support bearing is released on the body
without the centering pin, a chassis/wheel alignment check must
be carried out after installation.
Necessary preliminary tasks:
•
Remove swivel bearing
Warning!
Risk of injury!
Secure spring strut against falling out.
Unclip protective cap (1) and disconnect plug connection
underneath.
Unscrew nuts (2).
Installation:
Make sure protective cap is correctly seated.
Tightening torque 31 31 1AZ
.
Important!
It is essential to use the pictured nuts to ensure correct screw-
fastening of the dome cross-brace ring!
Installation:
Replace self-locking nuts.
RA Removing and installing complete front left or right spring strut (M3)
BMW AG - TIS
21.02.2013 21:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
