3 Series E92 M3 (S65) COUPE
51 71 348
Removing and installing/replacing
suspension cross-brace mounting
Special tools required:
•
00 9 120
Important!
Driving without the suspension cross-brace is not permitted.
(Risk of damage to the body).
Screws of suspension cross-brace and cross-brace mounting
must be tightened to torque and then tightened down with
special tool 00 9 120 .
Necessary preliminary tasks:
•
Remove both suspension cross-braces
Remove cowl panel cover
Note:
Air manifold is shown removed for purposes of clarity.
Release mucket in covered area.
Release screws (1 and 2).
Remove suspension cross-brace mounting with middle heater
bulkhead (3).
Installation:
Replace screw (1).
RA Removing and installing/replacing suspension cross-brace mounting
BMW AG - TIS
21.02.2013 21:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -