3 Series E92 M3 (S65) COUPE
32 31 070
Removing and installing / replacing lower
section of steering spindle
Warning!
Scalding hazard!
This work may only be carried out on an exhaust system
which has cooled down.
Important!
If the lower section of the steering spindle is separated from
the steering gear/universal joint, the steering column switch
cluster may be damaged when the steering wheel is turned.
Necessary preliminary tasks:
•
Remove universal joint
Release clamping screw (1).
Detach steering spindle lower section (2) from power steering
gear.
Installation:
Clean thread to remove all remnants of screw securing adhesive.
Lower section of steering spindle can only be attached in one
position to the power steering gear.
Replace clamping screw.
Clamping screw must rest in groove of power steering gear.
No kinking permitted!
Tightening torque 32 31 1AZ
.
RA Removing and installing / replacing lower section of steering spindle
BMW AG - TIS
21.02.2013 22:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
