3 Series E92 M3 (S65) COUPE
Clamping screws must rest in groove of steering column or lower
section of steering spindle.
No kinking permitted!
Tightening torque 32 31 5AZ
.
After installation:
•
Turn steering wheel in both directions to full lock. The airbag
warning lamp must not light up in the process.
•
Carry out steering angle sensor adjustment
•
Check directional stability of car
RA Replacing universal joint for upper section of steering spindle
BMW AG - TIS
21.02.2013 22:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
