3 Series E92 M3 (S65) COUPE
Unclip cover (1), release screw behind and remove deflection
pulley (2) from oil filter housing.
Installation:
Pin (3) of deflection pulley must be correctly seated in oil filter
housing.
Release banjo bolt (1) and detach pressure line (2) from vane
pump.
Release hose clamp (3) and detach suction line (4) from vane
pump.
Installation:
Replace all sealing rings.
Make sure hydraulic lines are laid without tension and with
sufficient spacing to adjoining components.
Tightening torque 32 41 8AZ
.
Release screws (1) and remove vane pump towards front.
Installation:
Tightening torque 32 41 12AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Removing and installing (replacing) vane pump for power steering (S65)
BMW AG - TIS
21.02.2013 22:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -