3 Series E92 M3 (S65) COUPE
33 11 091
Replacing drive flange on left or right of rear
differential (M3)
Note:
When replacing the drive flange, you must also replace the shaft
seal.
L
Drive flange, left
R
Drive flange, right
Necessary preliminary tasks:
•
Remove output shaft from rear differential and tie back
Press drive flange (1) with suitable screwdrivers off rear
differential.
Installation:
Replaced deformed or damaged dust plates.
Insert drive flange and rotate until spline on flange meshes with
teeth on differential bevel gear.
Press drive flange in further until circlip locates with an audible
click.
Important!
High installation forces indicate that the spline teeth on the
drive flange/differential bevel gear are damaged/deformed!
Check spline teeth, replaced damaged parts.
RA Replacing drive flange on left or right of rear differential (M3)
BMW AG - TIS
21.02.2013 22:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
