3 Series E92 M3 (S65) COUPE
51 11 157
Replacing front bumper trim
Necessary preliminary tasks:
•
Remove front bumper trim
•
Remove front grille centre section
•
If necessary, remove number/license plate holder
•
Remove middle grille
•
If necessary, remove cover for headlight washer system
•
Remove cover cap for tow lug
Version with Park Distance Control (PDC):
•
Remove ultrasonic transducer
Release expander rivets (1) and pull off seal (2) upwards in
direction of arrow.
Installation:
If necessary, replace faulty expander rivets (1).
Remove sheet metal nuts (1) on left/right.
Installation:
If necessary, replace faulty metal nuts (1).
Press down catches (2) on insert (1) and remove insert (1) in
direction of arrow.
RA Replacing front bumper trim
BMW AG - TIS
22.02.2013 01:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
