bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

29 RA Removing And Installing_replacing Lock Cylinder For Passenger Airbag Deactivatio > < 27 RA Removing And Installing_replacing Rear Console|Page 1625
Page 1
background image

51 16 340

Removing and installing/replacing lock for
right glovebox

Open glovebox.

Release screws (1).

Remove lower section (3) and upper section (2) of lock.

Replacement:

Insert ignition key (1) in lock cylinder (3).

Turn ignition key (1) slightly, carefully raise catches (2) and pull
out lock cylinder (3) with ignition key (1) in direction of arrow.

If necessary, force catches (2) open.

RA  Removing and installing/replacing lock for right glovebox

BMW AG - TIS

22.02.2013  02:20

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

29 RA Removing And Installing_replacing Lock Cylinder For Passenger Airbag Deactivatio > < 27 RA Removing And Installing_replacing Rear Console|Page 1625