3 Series E92 M3 (S65) COUPE
Open door window.
Fit special tool 51 0 320 in front door and press back as far as it
will go.
Note:
Special tool 51 0 320 must rest correctly against door and reach
the stop on guide (1).
Raise the door window.
Adjusting retraction depth:
Attach special tool 51 3 080 to door window glass
Close front door and door window
Note:
2 items of special tool 51 3 080 are required for rapid
adjustment of retraction depths.
Measure and if necessary adjust retraction depth (C) in
areas (A and B).
Retraction depth (C):
A = 2.5
±
0.5 mm
B = 3.5
±
0.5 mm
Important!
Front door must open and close without the door window
glass touching the roof trim strip.
Attach special tool 51 3 010 to door window (1).
Slide door window (1) against special tool 51 0 320 .
Adjust retraction depth of door window (1) in area of A and B-
pillar.
Note:
The door window must rest against special tool 51 0 320 while
adjusting the retraction depth.
Special tool 51 0 320 serves as a stop in longitudinal direction.
RA Adjusting left or right front door window glass
BMW AG - TIS
22.02.2013 02:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -