bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

15 RA Removing And Installing_replacing Valve Housing For Lumbar Support (M3 Sport Sea > < 13 RA Removing Or Installing_replacing Lumbar Cushion On Front Seat (M3 Sport Seat)|Page 1897
Page 1
background image

52 16 055

Replacing an air cushion for backrest width
adjustment (M3 sport pack) on left or right

Necessary preliminary tasks:

Remove rear panel on front seat

Partially remove backrest cover

Colour coding for air cushion, backrest width adjustment:

1. 

Yellow air hose = air supply, left air cushion for backrest width

adjustment.

2. 

Brown air hose = air supply, right air cushion for backrest

width adjustment.

Unlock and detach quick connector from yellow or brown air hose
(1) or (2).

Unclip carrier for backrest width adjustment from backrest frame.

Feed carrier with air hose out of backrest frame.

Installation:

Make sure the carrier for backrest width adjustment is fitted
correctly on the backrest frame.

Install air hoses without kinks.

Note:

Carry out function test.

RA  Replacing an air cushion for backrest width adjustment (M3 sport pack) on left o

BMW AG - TIS

22.02.2013  04:17

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

15 RA Removing And Installing_replacing Valve Housing For Lumbar Support (M3 Sport Sea > < 13 RA Removing Or Installing_replacing Lumbar Cushion On Front Seat (M3 Sport Seat)|Page 1897