3 Series E92 M3 (S65) COUPE
63 21 183
Removing and installing/replacing left or right
tail light (on rear lid)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove panel for rear lid
Release nut (1), gripping the threaded pin with a suitable tool in
so doing. Tightening torque 63 21 3AZ
.
Remove nut (1) with mounting bracket (2).
Feed rear light (4) outwards out of rear lid (3).
Disconnect associated plug connection.
Remove rear light (4).
Remove socket housing.
Installation:
Make sure sealing frame for rear light is correctly seated on rear
light (4)
Position lugs (5) of rear light (4) exactly over side edge of rear
lid (3).
Make sure retaining bar (2) is correctly seated on rear lid (3).
RA Removing and installing/replacing left or right tail light (on rear lid)
BMW AG - TIS
22.02.2013 06:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
