3 Series E93 320i (N46T) CONVER
Measuring fuel pressure:
-
Connect pressure sensor to DIS Tester
-
Start engine
-
Select Measurement.
-
Multimeter function appears
-
Select Pressure test
-
Read off fuel pressure
Compare test pressure with setpoint value.
Switch off engine.
Keep special tool 13 3 010 ready for further tests.
Further tests are described in the section "Fuel pressure check".
Note:
Interrogate fault memory of DME control unit.
Check stored fault messages.
Rectify faults.
Then clear fault memory.
RA Checking fuel pump delivery pressure (N40, N42, N45, N46)
BMW AG - TIS
23.01.2013 18:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -