3 Series E93 320i (N46T) CONVER
Carry over the work step shown symmetrically to the other side of
the vehicle.
Open weld joints in areas (1).
Installation:
Weld new components in areas (2) additionally.
Carry over the work step shown symmetrically to the other side of
the vehicle.
Open weld joints in areas (1).
Open adhesive joints in area (2).
Remove rollover protection mounting (3).
Installation:
Plug/spot-weld in area (2) of wheel arch side.
Carry over the work step shown symmetrically to the other side of
the vehicle.
Open weld joints in areas (1) and (2).
Installation:
Set 5 additional welding spots in area (3).
Carry over the work step shown symmetrically to the other side of
the vehicle.
Open weld joints in area (1).
Installation:
Weld new component in area (2) additionally.
RA Replacing luggage compartment floor (complete with both inner wheel arch section
BMW AG - TIS
23.01.2013 22:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
