3 Series E93 320i (N46T) CONVER
Preparation of new part:
Open weld joints in area (1).
Mark severance cut (2) in accordance with vehicle and cut.
Important!
Cut outer metal sheet only.
Preparation of new part:
Open weld joints in areas (1).
Preparation of new part:
Open weld joints in area (1).
Installation:
The cut part (2) is not needed.
Preparation of new part:
Open weld joints in area (1).
Mark severance cut (2) in accordance with vehicle and cut.
RA Replacing luggage compartment floor (complete with left or right inner wheel arc
BMW AG - TIS
23.01.2013 22:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -