3 Series E93 320i (N46T) CONVER
Important!
Cut outer plate only for following severance cuts.
Measurement a = approx. 130 mm from edge of rectangular hole.
Measurement b = approx. 160 mm from centrepoint of 12 mm dia. bore.
Open weld joints in areas (1).
Installation:
Weld in reinforcing panels at all severance cuts.
Mark severance cuts in accordance with specified measurements and cut.
Important!
Cut outer plate only for following severance cuts.
Measurement a = approx. 175 mm from edge of cowl panel.
Dimension b = approx. 240 mm before bore hole dia. 20 mm.
Open weld joints in areas (1).
RA Replacing front left door pillar (front side panel removed)
BMW AG - TIS
23.01.2013 23:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -