3 Series E93 320i (N46T) CONVER
Backrest mounting on tunnel side:
1.
Install tunnel-side backrest strut.
Important!
Plastic bushing must not be damaged
2.
Tighten screw hand-tight.
Note:
Tighten down stud and screw only after mounting backrest on
both sides.
Tightening torque:
•
Stud on door side: 52 10 08AZ
.
•
Screw on tunnel side: 52 10 07AZ
.
Installation:
Install toothed segment cover (1).
Make sure Bowden cable is in correct position along spacer
Assemble LVK module and front seat.
RA Replacing backrest release cable for front left or right seat
BMW AG - TIS
24.01.2013 01:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -