bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

27 RA Removing And Installing_replacing Roof Shell At Rear|Page 2187 > < 27 RA Removing And Installing_replacing Roof Shell At Rear
Page 2
background image

Unscrew left and right nuts (1).

Tightening torque:  54 37 17AZ

.

Remove grounding strap.

Roof shell, left side:

Unlock plug connections (1) on antenna amplifier and
disconnect.

Unclip wiring harness.

Unlock plug connection (2) on blocking circuit and disconnect.

Roof shell, right side:

Unlock plug connection (1) on blocking circuit and disconnect.

Unclip wiring harness (1) from roof shell.

Installation:

If necessary, replace faulty clips.

RA  Removing and installing/replacing roof shell at rear

BMW AG - TIS

24.01.2013  01:52

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

27 RA Removing And Installing_replacing Roof Shell At Rear|Page 2187 > < 27 RA Removing And Installing_replacing Roof Shell At Rear