3 Series E93 320i (N46T) CONVER
Left side on roof shell:
Unfasten plug connection (1) and disconnect.
Release nut (2) and remove blocking circuit.
Right side on roof shell:
Unfasten plug connection (1) and disconnect.
Release nut (2) and remove antenna amplifier.
Unfasten plug connection (3) and disconnect.
Release nut (4) and remove blocking circuit.
Mark screws (1) and release.
Tightening torque: 54 37 11AZ
.
Remove locking part (2).
Remove seal (3).
Measure heights of all barrel screws (1) to roof shell with a depth
gauge and note down.
Carry over adjustment to new roof shell.
Installation:
Insert barrel screws with Loctite.
RA Removing and installing/replacing roof shell at rear
BMW AG - TIS
24.01.2013 01:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -