3 Series E93 320i (N46T) CONVER
54 37 185
Removing and installing/replacing hydraulic
unit (drive) for retractable hardtop
Necessary preliminary tasks:
•
Remove luggage compartment floor trim panel
Caution!
Hydraulic fluid may emerge from the disconnected lines and
the open connections on the hydraulic unit (drive).
Protect components and work area with suitable materials
(e.g. cloths).
Follow repair instructions for hydraulic system.
Do not fit hydraulic lines in kinked, crushed or transposed
condition.
Release screws (1).
Remove cover (2) for hydraulic unit.
Cut open cable tie (1).
Installation:
Replace faulty cable ties.
Detach foam part from hydraulic unit.
Remove relay (2) from holder.
RA Removing and installing/replacing hydraulic unit (drive) for retractable hardtop
BMW AG - TIS
24.01.2013 01:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
