3 Series E93 320i (N46T) CONVER
54 37 ...
Aligning basic gauge
Special tools required:
•
00 9 251
•
54 0 121
•
54 0 122
•
54 0 123
Important!
Always install and remove basic gauge with 2 helpers.
To prevent damaging the basic gauge, set the gauge down
only in the transportation crate or on the vehicle side wall.
The basic gauge is a highly sensitive measuring instrument
which reacts even to light impacts with distortion.
The basic gauge must be checked for dimensional accuracy
on a master gauge after being subjected to impact or
dropped.
The basic gauge stipulates the basic setting in the X-, Y- and Z-
axes.
The basic gauge is absolutely essential for the following work
operations:
-
Gauging coupling fastener
-
Gauging roof module bracket
Lift out cover (1) on left base plate.
Installation:
Cover (1) for base plate must be replaced after each removal.
Important!
The outer left hole in the base plate is the reference point for
the following jobs.
Basic gauge:
RA Aligning basic gauge
BMW AG - TIS
24.01.2013 01:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
