3 Series E93 320i (N46T) CONVER
63 12 870
Replacing ignition unit for left xenon
headlight (with xenon bulb)
Warning!
Version with xenon headlights: Danger to life due to high
voltage! Therefore, before removing, disconnect all
components from the power supply (lighting system and
ignition off).
Work on the entire xenon lighting system (control unit, ignition
unit with bulb) may only be carried out by specialist personnel.
Follow instructions for handling light bulbs (exterior lights).
Important!
Ignition unit and xenon bulb are viewed as a single
component and must not be separated.
Necessary preliminary tasks:
•
Remove front left wheel arch trim
Note:
Headlight removed for purposes of clarity.
Release screws (1) and remove cover cap (2) from headlight.
Tightening torque 63 12 6AZ
.
Installation:
Make sure cover cap (2) is correctly seated on
headlight (otherwise headlight subject to leaks).
RA Replacing ignition unit for left xenon headlight (with xenon bulb)
BMW AG - TIS
24.01.2013 03:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -