3 Series E93 320i (N46T) CONVER
67 11 610
Removing and installing/replacing servodrive
in storage compartment
Necessary preliminary tasks:
•
Remove storage compartment
Release screws (1).
Lever out air duct (3) at catch (2) and feed out of storage
compartment.
First feed air duct (1) to right out of guides (2) and duct (3),
then remove to left out of storage compartment.
Installation:
Seal (4) must not be damaged.
Unclip Bowden cable (1) from holder (2).
Release screws (3).
Remove servodrive (4).
RA Removing and installing/replacing servodrive in storage compartment
BMW AG - TIS
24.01.2013 04:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -