3 Series E93 320i (N46T) CONVER
34 11 Front Brake E93
Different thicknesses on brake linings
max. mm
0.01
Surface roughness of braking surfaces
(precision-turned)
Ra
µ
The brake discs must always be assigned by way of the
relevant vehicle identification number and the Electronic
Parts Catalogue (ETK)!
New brake pads may only be installed if the brake disk
thickness is greater than or equal to the minimum brake
disc thickness (MIN TH).
Brake disc diameter
Models: 320i;
mm
312
Brake disc diameter
Models: 325i; 330i with N52
mm
330
Brake disc diameter
Models: 330d; 328i, 330i with N53, 335i
mm
348
Wear warning from residual lining thickness
mm
3.0
Brake disk minimum thickness (MIN TH) stamped on
brake disk body
Models: 320i;
mm
22.4
Brake disk minimum thickness (MIN TH) stamped on
brake disk body
Models: 325i; 330i with N52
mm
22.4
Brake disk minimum thickness (MIN TH) stamped on
brake disk body
Models: 330d; 328i, 330i with N53, 335i
mm
28.4
Max. machining limit per friction ring side (M models must
not be machined!)
mm
0.8
TD Front Brake E93
BMW AG - TIS
24.01.2013 06:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
