3 Series E93 325d (M57T2) CONVER
11 21 531
Replacing all main crankshaft bearing shells
(M57T2)
Special tools required:
•
00 2 590
•
00 9 120
Necessary preliminary tasks:
•
Remove engine
•
Remove cylinder head
•
Remove timing case at front
•
Remove radial shaft seal at rear
•
Remove oil pump
Important!
Replace main bearing screws.
Do not wash off bolt coating.
There must be no oil in the blind holes (risk of cracking).
Important!
Check grinding size of crankshaft.
RA Replacing all main crankshaft bearing shells (M57T2)
BMW AG - TIS
25.01.2013 16:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -