bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing_replacing Diesel Particulate Filter (M57T2)|Page 617 > < 2 RA Removing And Installing Complete Exhaust System (M57T2top) (without Diesel Parti|Page 614
Page 1
background image

18 31 080

Removing and installing/replacing diesel
particulate filter (M57T2)

Warning!

Scalding hazard!

Only perform these tasks on an engine that has cooled down.

Necessary preliminary tasks:

E83, E90, E91 only: Remove right engine support arm

Remove complete exhaust system

Pull off hose (1).

Unlock plug connection (2) and remove.

Unlock connector (2) and remove.

Unlock plug (3) and remove.

Release screw.

Tightening torque 18 32 1AZ

.

Remove V-clamp (1).

Installation:

V-clamp must be replaced each time it is opened.

Replace seal.

RA  Removing and installing/replacing diesel particulate filter (M57T2)

BMW AG - TIS

25.01.2013  18:12

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing_replacing Diesel Particulate Filter (M57T2)|Page 617 > < 2 RA Removing And Installing Complete Exhaust System (M57T2top) (without Diesel Parti|Page 614