3 Series E93 325d (M57T2) CONVER
51 13 316
Removing and installing/replacing trim strip
on roof gutter at left or right
Detach mucket (1) in area of trim strip (3).
Pull seal (2) out of trim strip (3).
Release screws (4).
Installation:
Make sure seal (3) and mucket (1) are correctly seated.
Carefully feed trim strip (1) out of mucket (2) and remove.
Installation:
Sealing tape on trim strip (1) must not be damaged.
Installation sequence:
-
Feed trim strip (1) into mucket in area (A).
-
Secure trim strip (1) with screws loose.
-
Insert rubber seal (2).
-
Screw down trim strip (1).
RA Removing and installing/replacing trim strip on roof gutter at left or right
BMW AG - TIS
26.01.2013 01:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -