3 Series E93 325d (M57T2) CONVER
51 16 366
Removing and installing right glovebox with
housing
Necessary preliminary tasks:
Version with can holder:
•
Remove both front cup holders
Release screws (1).
Pull out glovebox (1) slightly.
Disconnect plug connections (2) and feed cable out of guide (3).
Depending on version, disconnect further plug connections.
Remove glovebox (1).
Installation:
Guides (1) for glovebox must not be damaged or missing.
Version with can holder:
Guides (2) for cup holders must not be damaged or missing.
RA Removing and installing right glovebox with housing
BMW AG - TIS
26.01.2013 01:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -