3 Series E93 325d (M57T2) CONVER
Close hinge arm (1).
Important!
Do not damage sheet metal flange of side panel.
Carefully twist out cover bowl (2) at first at rear in direction of
arrow from side panel and remove.
Installation:
Fit approx. 0.5 m long cable (1) in groove on rubber collar (2).
Installation:
Install cover bowl (1).
Thread ends of cable (2) outwards.
Align bottom rubber collar (3) with recess (see arrow).
Pull rubber collar (3) over the cover bowl by pulling the ends of
cables (2).
Installation:
Slowly pull out cable ends (2).
Press rubber collar (1) into groove with special tool 00 9 321 .
RA Replacing cover bowl
BMW AG - TIS
26.01.2013 01:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -