3 Series E93 325d (M57T2) CONVER
51 21 140
Removing and installing/replacing complete
lock cylinder in left or right front door
Lever out seal (1) and release screw in area (A).
Installation:
Make sure seal (1) is correctly seated on door.
Pull off cover (1) with ignition key in direction of arrow with
outside door handle (2) opened slightly.
Version with light package:
Installation:
Make sure outside door handle light (1) is correctly positioned in
area (2).
Guides (3) of outside door handle light (1) must be correctly
seated in carrier for outside door handle (4).
Remove catches (1) and detach cover (2) from lock cylinder (3).
Installation:
Catches (1) of cover (2) must not be damaged.
Paddle (4) of lock cylinder (3) must not be damaged.
RA Removing and installing/replacing complete lock cylinder in left or right front
BMW AG - TIS
26.01.2013 01:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
