3 Series E93 325d (M57T2) CONVER
51 24 100
Removing and installing/replacing rear lid
lock
Necessary preliminary tasks:
•
Remove panel for rear lid
Left side:
Disconnect plug connection (1).
Disconnect plug connection (2) on rear lid lock (4).
Release screws (3).
Tightening torque 51 24 1AZ
.
Right side:
Disconnect plug connection (1) on rear lid lock (3).
Disconnect plug connections (2).
Release screws (4) and fold rear lid lock down (3) slightly.
Tightening torque 51 24 1AZ
.
Unclip holder (1) with screwdriver (2).
Unhook Bowden cable (4) from lever (3).
Remove rear lid lock (5).
RA Removing and installing/replacing rear lid lock
BMW AG - TIS
26.01.2013 02:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
