3 Series E93 325d (M57T2) CONVER
51 37 240
Removing and installing or replacing outer
window cavity cover strip for door window,
rear left or right
Special tools required:
•
00 9 311
Open lid for retractable hardtop.
Open door window.
Detach window cavity cover strip (1) at clip (2).
Installation:
If necessary, replace faulty clip (2).
Make sure water drain channels (3) are in correct position.
The weatherstrip (1) in area (A) must be sealed on the inner side
with butyl tape.
Attach adhesive tape under window cavity cover strip (1)
(damage to paintwork).
Starting at the rear, carefully lever weatherstrip (1) out of clips (2)
on side panel with special tool 00 9 311 .
Important!
The weatherstrip (1) can bend when lifted out too far.
Installation:
If one or several clips (2) detach from the vehicle body, they must
be replaced.
If necessary, touch up any paintwork damage in the area of the
detached clips (2).
RA Removing and installing or replacing outer window cavity cover strip for door wi
BMW AG - TIS
26.01.2013 03:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
