3 Series E93 325d (M57T2) CONVER
51 47 143
Removing and installing/replacing panel for
passenger compartment partition
Necessary preliminary tasks:
•
Remove rest side section on left/right
Version with ski bag:
•
Remove trim for ski bag
Pull off cover (1) downwards.
Unclip trims (2).
Release screw (3) and clips (4).
Pull panel (1) towards rear and thereby release clips (2) and
retainers (3).
Feed out trim (1).
Installation:
If necessary, replace faulty clips (2) and retainers (3).
Installation:
After removal clips can be in position A.
For installation clips must be in position B.
RA Removing and installing/replacing panel for passenger compartment partition
BMW AG - TIS
26.01.2013 09:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -