3 Series E93 325d (M57T2) CONVER
51 71 380
Removing and installing / replacing vibration
damper
Necessary preliminary tasks:
•
Remove battery
Release screws (1) and remove battery carrier (2).
Tightening torque 51 71 14AZ
.
Replacement:
Release nuts (1) and remove vibration absorber (2) from battery
carrier (3).
Tightening torque 51 71 15AZ
.
RA Removing and installing / replacing vibration damper
BMW AG - TIS
26.01.2013 09:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
