3 Series E93 325d (M57T2) CONVER
Disengage return spring (1).
Installation:
Replace return spring (1).
Note:
Cover working area.
Do not allow any chips to get into the seat and backrest
mechanisms.
Mark rivet (2) with centre punch and drill out.
Lever out cover (1) with screwdriver.
Installation:
Before fitting kinematic assembly, apply a thin coating of grease to
contact surface.
Installation:
Engage return spring (1) before screwing kinematic assembly into
place.
RA Replacing backrest release cable for front left or right seat
BMW AG - TIS
26.01.2013 09:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
