3 Series E93 325d (M57T2) CONVER
Using special tool 54 0 180 in conjunction with 00 9 450 , turn
all barrel screws (1) until contact is made with body.
Tightening torque: 0.05 Nm (=5 cNm).
Screw down bracket with shims.
Tightening torque: 54 37 02AZ
.
Release screw connection (1) for gauge on rear module bracket.
Release screw connections for gauge on roof module bracket.
Remove rear module bracket gauge.
RA Gauging rear module
BMW AG - TIS
26.01.2013 10:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
