3 Series E93 325d (M57T2) CONVER
Release nuts (1) on roof hinge bracket.
Installation:
Replace nuts.
Screw on bracket loosely.
Bracket should still be able to be slid in order to centre itself.
Close convertible top.
Screw down rear nut and open convertible top.
Screw down front nut.
Tightening torque: 54 37 10AZ
.
Check gap dimensions for convertible top.
RA Removing and installing/replacing hinge
BMW AG - TIS
26.01.2013 10:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -