3 Series E93 325d (M57T2) CONVER
Unfasten plug connection (1) and disconnect.
Detach cable tie.
Installation:
Replace cable tie.
Release screws (1).
Remove shaper (2) from roof shell.
Important!
Tape off cover (1) of roof hinge bracket in marked area.
Risk of damage!
With a second person helping, secure roof shell at front against
tilting.
Release screws (2).
Installation:
Replace microencapsulated screws.
Turn roof hinge bracket.
Important!
Lock barrel screws with a flat wrench without fail.
Mark screws (1) and release.
Tightening torque: 54 37 04AZ
.
Remove roof shell with a second person helping.
RA Removing and installing/replacing roof shell at front
BMW AG - TIS
26.01.2013 10:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
