3 Series E93 325d (M57T2) CONVER
Note:
Before removing, mark position of screws (1) to ensure correct
alignment during installation.
Do not release screws.
Important!
Proceed with the greatest possible caution when carrying out
the following tasks.
Risk of damage!
Three persons are essential for helping to carry out the
following tasks.
Generously cover bumper area (loading sill) with protective
covers (1).
Important!
Rear module sinks if incorrectly supported. Risk of damage!
Position a helper on both the left and right sides of the rear
module.
Grip rear module with two hands on rear module kinematic
assembly and support Z-direction.
Note:
Bracket is double-jointed and bends.
RA Removing rear module
BMW AG - TIS
26.01.2013 10:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
