3 Series E93 325d (M57T2) CONVER
54 37 195
Removing and installing/replacing right
hydraulic cylinder from roof shell, middle
Necessary preliminary tasks:
•
Remove roof lining.
•
Have roof module supported partially by helpers
Caution!
Hydraulic fluid may emerge from the disconnected lines and
the open connections on the hydraulic cylinder.
Protect components and work area with suitable materials
(e.g. cloths).
Note:
Hydraulic system must be at zero pressure.
Open screw on hydraulic unit 1.5 turns.
Lever out clips (1).
RA Removing and installing/replacing right hydraulic cylinder from roof shell, midd
BMW AG - TIS
26.01.2013 10:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
